A Otto's company - serving Garland, TX

Spring Repair in Garland, TX

Every visit starts with

Full 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included

Your new garage door for as low as $59/month*on approved credit; ask for current terms

You get a price before we start. It does not change when the truck arrives.

Styles & brands we work with

Raised-panel steel
Raised-panel steel
Carriage house
Carriage house
Modern flush
Modern flush
Full-view glass
Full-view glass
LiftMaster openers
LiftMaster openers
Chamberlain openers
Chamberlain openers

Before & after – our own jobs

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Spring Repair in Garland, TX

Our Garage Door Repair services for spring repair in Garland typically cost between $180 and $350, depending on the specific weight of your door, the size of the spring, and whether we are replacing a single spring or a set. If your garage door will not open, makes a loud bang when you try to operate it, or looks crooked when it does move, you likely have a broken torsion or extension spring. We handle these repairs daily, and because we are local to Garland, we can often get your door back in service the same day you call us at (945) 202-2600.

I am Otto Reinhardt, and I have been fixing garage doors in this county since 2004. When you call us, you are not talking to a call center in another state; you are talking to the person who will show up in the truck. We operate on the L.O.C.A.L. values code-Local roots, On time, Community first, Accountable, and Loyal-which means we do not play games with pricing once we are standing in your driveway. If you are looking for honest Garage Door Repair in Garland, you have found the right place.

The Danger of Broken Springs

I need to be clear about this because I see homeowners try to do this themselves every year. A garage door is a heavy piece of equipment, often weighing 200 pounds or more. The springs are not just holding the door up; they are under immense tension. They are the engine of your door system. When a spring snaps, it releases that stored energy instantly. I have seen springs snap and leave holes in drywall, shatter car windshields, and cause serious injury to anyone standing nearby.

If you see a gap in the coils of your spring or if the cable is hanging loose, do not try to move the door, and do not try to force the opener to lift it. The opener is designed to lift a balanced door, not a dead weight. Forcing it will burn out the motor, which turns a simple $200 spring repair into a much more expensive opener replacement. Call us at (945) 202-2600, and stay clear of the door until we arrive.

When You Need Spring Repair

Springs do not last forever. They are rated for a specific number of cycles, and every time you open and close your door, you are using up those cycles. Here are the most common signs that your springs have reached the end of their life:

  • The Loud Bang: This is the most common symptom. It sounds like a gunshot or a firecracker going off inside your garage. That is the sound of the metal finally snapping under years of tension.
  • Door Won’t Lift: If you press the button and the opener hums but the door does not move, the spring has likely failed. The opener is not strong enough to lift the door without the counter-balance of the spring.
  • Crooked Movement: If the door starts to go up but binds or jerks to one side, it means one spring has broken while the other is still holding. Stop immediately. This puts dangerous torque on your tracks and rollers.
  • Visible Gap: If you look at the torsion spring above your door, you will see a clean break in the metal coil. It is impossible to miss once you know what to look for.
  • Cable Slack: If you see cables dangling or loose on the side of the door, it is a direct result of the spring failing to keep tension on the system.

We see this often in neighborhoods like Firewheel or North Garland, where many homes were built with similar door models and builders installed standard-cycle springs that are now hitting their limits at the same time. If your neighbors are calling for spring service, it is a good idea to check yours.

Our Spring Repair Process

When I arrive at your home, I am not there to sell you a new door you do not need. I am there to fix the problem correctly the first time. We follow a strict process, including Track Realignment if needed, to ensure your door is safe and balanced before we leave.

  1. Safety Assessment: I inspect the entire system. I look at the cables, the drums, and the bearings to make sure the spring failure did not damage other components.
  2. Cycle Calculation: I do not just put on the cheapest spring I can find. I measure the door weight and calculate the spring cycles so you get the longest life possible out of the new hardware. I treat your door like I treat my own.
  3. Proper Tensioning: Using professional winding bars, I install the correct, high-quality oil-tempered springs. We ensure the tension is perfectly matched to the weight of your specific door panel.
  4. The Balance Test: Once installed, I disconnect the opener and manually lift the door. A properly balanced door should stay in place when you let go of it halfway up. If it falls or shoots up, the springs are not right. I adjust until it is perfect.
  5. Lubrication and Inspection: I lubricate the tracks, hinges, and bearings to ensure the door runs smoothly. This is part of our standard service.
  6. The 90-Day Done Right Promise: Every spring job is backed by our written guarantee. If it is not right, we make it right. One call brings me back.

We work with all major brands including Clopay, Amarr, Wayne Dalton, and Craftsman. Whether you have a standard residential door or a heavier wood-carriage style door, we have the right springs in our truck.

Spring Repair Pricing in Garland

I believe in upfront pricing. You will never get a quote on the phone only to find a higher bill when I arrive at your door. We offer a fair, transparent price for high-quality parts and labor. We do not have hidden trip charges if you are inside our home county, and we always honor our discounts.

Pricing Factors:

  • Single vs. Double: If you have a two-spring system, I highly recommend replacing both at the same time. If one broke, the other has seen the exact same amount of wear and will likely fail within a few months. Replacing both saves you a second trip charge and the inconvenience of another broken door.
  • Spring Type: We use high-cycle springs that last significantly longer than the standard builder-grade springs. The cost difference is minimal, but the longevity is worth it.
  • Door Weight: Heavier doors require larger, more robust springs. The price is dictated by the specifications of the spring required to balance your door safely.

Remember, we offer a $40 discount on any repair over $200, and a permanent 10% discount for seniors and veterans. If you have a written estimate from another company, I am happy to provide a Free Second Opinion. Call us at (945) 202-2600 for an exact quote.

FAQs – Spring Repair

Is it cheaper to repair the spring or replace the whole garage door?

In almost every case, repairing the spring is significantly cheaper than replacing the door. A spring replacement is a routine maintenance item that restores your door to perfect working order for a fraction of the cost of a new installation. Unless your door panel is severely damaged or rotting, you do not need a new door.

Can you come today to fix my spring?

Yes, we prioritize spring repairs because we know you cannot get your car out of the garage when the spring is broken. If you call us early in the day, we can usually make it to your home in Garland that same afternoon. Our goal is to get you back to your routine without keeping you waiting.

Why do I need to replace both springs if only one is broken?

Garage door springs are usually installed in pairs, and they are designed to work together. They have been through the same number of “cycles” or lifts. When one snaps, the other is typically fatigued and ready to break as well. Replacing both ensures your door remains balanced and saves you the cost and hassle of a second service call in a few months.

Can I try to wind the spring myself?

Please, do not attempt this. Garage door torsion springs are under extreme tension. Using the wrong tools or not having the experience to handle that tension can lead to the spring slipping and causing severe injury. It is not worth the risk. We have the proper tools and training to do this safely. Call us at (945) 202-2600 and let us handle the dangerous work.

If you need reliable service from someone who lives and works in this community, give us a call. We are ready to help you get your door back on track. You can find more information about our full range of services on our home page.

Written by Otto Reinhardt, Owner at Otto’s Garage Door, serving Garland.

Need Garage Door help in Garland? Licensed & insured · 30-60 min response · free estimates
Call (945) 202-2600
Local Service Coverage

Request a Free Estimate in Garland

Tell us what you need - Otto's Garage Door responds fast. No obligation.

By clicking submit, you accept our Privacy Policy and consent to receive communications by phone, text, or email concerning your request, including by the partner businesses that may perform the service.

Prefer to text? Text Us
Call Now - 24/7 Dispatch